WEBINAR UDOMORE-DEPTH :

HOW TO SAVE MONTHS & MILLIONS IN E&P DECISION-MAKINGS



Frequently Asked Questions


1How do you include seismic velocities into the model?
You can use two velocity functions: 1) A*Vseis (A = constant rescaling factor, Vseis = seismic interval velocity map)to best calibrate your seismic velocities to the well velocities. 2) A*Vseis+B (A = constant rescaling factor, B = constant shifting factor, Vseis = seismic interval velocity map), meaning that a calibration and shifting of your seismic velocity. To input your seismic velocity to UDOMORE Depth, you need to 1) compute seismic layer velocity in Petrel ; 2) input seismic velocity , and  A,  B parameters to the section A Vseis + B  in UDOMORE Depth . As a result, UDOMORE Depth will optimize your velocity model.
2Could you display a vertical section with the instantaneous velocity displayed ?
UDOMORE Depth does not create 3D velocity model for the moment. However, you can  do it easily by following some steps: Path 1) output the resulting interval velocity (Estimated interval velocity) from UDOMORE Depth and input them in  Petrel “make velocity model” , create a 3D velocity model using PETREL “make velocity model” Path 2) output the UDOMORE optimized velocity law parameters and input themto Petrel "make velocity model"using the same layering and choice of velocity laws.Create a 3D velocity model using PETREL “make velocity model”
3How many iterative updates of V0 and K should we do to reduce enough uncertainty at the well and optimize velocity ?
Iterate until it stabilizes around optimized values of V0 and K. If necessary enlarge the a priori uncertainty range associated to  updated V0 and K , to allow the plugin to scan a wider range of possibilities. Remember that Velocity function V0 + K*Z (V0 = constant velocity factor (instantaneous velocity at the surface)K = constant compaction factor,)  is non-linear function in the time to depth conversion formula. In case of a priori K values very different from the starting default k= 0.2 , it is advised to input a first k value consistent with existing calibrated sonic .
4Given I have time horizons and depth tops at wells, and I want to use a V0K law for a given interval, can I fix K and let UDOMORE generate a V0 map ? If yes can we visualize and save this V0 map ?
Yes. UDOMORE takes your  input velocity parameters  (values and uncertainty range as one sigma)as defining a prior velocity trend. UDOMORE then provides the best estimation of the posterior distribution  (kriged values and kriging standard deviation) for  these parameters, defining the post velocity trend (that minimizes the well depth mismatches). In the case of V0 + K*Z  velocity functions, UDOMORE does not directly output the resulting (or a posteriori ) V0 maps. 1) Should you define a priori constant V0 and K parameters  with associated uncertainty ranges, UDOMORE will estimate the values of posterior  V0 and K, inside the a priori uncertainty range , using  Bayesian kriging. The posterior V0,and k values are the ones that minimize the depth mismatches for this layer (and also influence the other layers). You can fix the value of a priori k by indicating a 0 associated sigma (no uncertainty). UDOMORE Depth does not directly output the resulting V0 map.  We can provide you the formulae to retrocompute a V0 map in Petrel if you need it. 2) If you are using the velocity function  A*V0_map + K*Z,  UDOMORE will best estimate the A scaling factor and the K value inside the a priori uncertainty range , the output V0 map will be equal to A*input V0 map.
5Does UDOMORE communicate with the velocity model of Petrel, or do we have to build a velocity model by using the depth maps or velocity maps from UDOMORE outputs ?
UDOMORE outputs a multi 2D layer interval velocity model that is a direct input to PETREL "make velocity model" with optimized velocity model parameters. You can also use the V0 and k values output by UDOMORE as an optimized input to make velocity model. However, UDOMORE doesn’t communicate directly with Petrel  "make velocity model" as there is no Petrel/Ocean API for us to program it.
6How UDOMORE generates the P90-P10 surfaces distribution?
UDMD provides as an output the best estimated depth/velocity/thickness and their uncertainties and also a given number of the simulated depth surfaces. For a given structural target,  UDOMORE Depth will compute the GRV from each simulated depth surfaces  using  Petrel "map base volumetric computations" within a Petrel workflow that we provide. The GRV curve is obtained by sorting values of the simulated GRVs by increasing order , UDOMORE Depth associates  the depth realization (map) to  a given quantile on the GRV curve. The way to derive P10, P50 and P90 depth scenarios could be discussed in more details by request.
7What is the probabilistic model used ?
The probabilistic model used is Bayesian Cokriging Estimation/simulation. References: 1)Sandjivy, L. & Shtuka, A. 2009, Depth conversion and associated uncertainties using consistent velocity model: A probabilistic unified model based on Bayesian approach, 11th International Congress of SBGf, Salvador, 2009 Link:   http://www.earthdoc.org/publication/publicationdetails/?publication=45546 2)P. Abrahamsen (1993) “Bayesian Kriging for Seismic Depth Conversion of Multi-layer Reservoir” in A. Soares (ed.) “Geostatistics Troia ’92”. Pp. 385-398 Link:   https://www.nr.no/sites/default/files/files/Bayesian-Multilayer-Abrahamsen-1993.pdf
8If I want to test Udomore for one month, what are the conditions ?
We offer  one month (30 days) of the free evaluation period and will guide you during the installation process. Condition: You need to have Petrel licence.


Warning: extract() [function.extract]: First argument should be an array in /home/seisquar/www/wp-content/plugins/professional-linkedin-widget/professional-linkedin-widget.php on line 222